Skip to content

Static Routing Between Subnets with RouterOS [DRAFT]

Lab Setup

For this lab, we'll need the following to be pre-configured:

  • host1 is on vmbr1 and has an IPv4 address of 10.0.1.10/24
  • host2 is on vmbr1 and has an IPv4 address of 10.0.1.11/24
  • host3 is on vmbr1 and has an IPv4 address of 10.0.2.10/24
  • host4 is on vmbr1 and has an IPv4 address of 10.0.2.11/24
  • routeros-r1 is on vmbr1 and has an IPv4 address on ether1 of 10.0.1.1/24
  • routeros-r2 is on vmbr1 and has an IPv4 address on ether1 of 10.0.2.1/24